Priest of the Order of the Butterfly
Posts: 508 from 2010/10/14
From: Nevada
I actually ran into this same exact issue. My G4 MDD is the FW800 version that came with the dual 1.42 CPUs. After using the computer for awhile and I would power down, it would not come back on until you pulled the power cord.
Its been awhile, but I changed out my memory and CPU. Not saying it is both causing the issue, but See what memory configuration you have. The very last memory module I had was actually bad, causing my MDD to behave erratically.
If you are brave, and I assume you have an MDD, You should buy a cheap 1.25ghz single GPU card, OC the card to 1.5ghz, and exchange the CPU card. Keep the card that comes out as a spare.
-=-=-=-
YUUUP!