MorphZone

PCI USB 2.0 card in PowerMac

Motosampy

# 1
Order of the Butterfly

Posts: 199 from 2004/8/14

From: Järvenp&a...

I just noticed that if I install a PCI USB 2.0 card (VIA chipset) into my FW800 MorphOS loses the onboard USB 1.1 ports

Can anyone confirm this ?
»03.11.12 - 18:35

pampers

# 2
Paladin of the Pegasos

Posts: 1061 from 2009/2/26

From: Tczew, Poland

I can't. My onboard ports works fine with my USB PCI card..
MorphOS 3.x
»03.11.12 - 18:40

Doffo

# 3
Priest of the Order of the Butterfly

Posts: 508 from 2010/10/14

From: Nevada

Heard someone else having that issue... Mine works great, but I have a NEC chipset USB. Believe it's a Belkin card.
-=-=-=-
YUUUP!
»03.11.12 - 18:42

geit

# 4
MorphOS Developer

Posts: 1053 from 2004/9/23

I just ran into the same problem with my powermac 3,4 after inserting an USB card.

Onboard somehow failed completely. My solution was to delete envarc:sys/Poseidon.prefs and reboot.

Since then all problems are gone.

Geit
»03.11.12 - 19:02

zukow

# 5
MorphOS Developer

Posts: 645 from 2005/2/9

From: Poland

check poseidon prefs but afaik all FW800 has onboard USB 2.0 and morphos since 3.0 knows that it is usb2.0
»03.11.12 - 19:28

Motosampy

# 6
Order of the Butterfly

Posts: 199 from 2004/8/14

From: Järvenp&a...

Thanks geit, deleting the prefs helped here too.

And you are right zukow, onboard is 2.0 (the keyboard hub is 1.1)
»03.11.12 - 21:12

pan1k

# 7
Acolyte of the Butterfly

Posts: 147 from 2009/1/20

I lose a single port. I will try to delete the prefs also.
MacMini 1.5Ghz / Amiga 4000T Cyberstorm 060, 132MB RAM, Cybervision 64/3D, XSurf-III, MP3@64, Buddha Flash / Amiga 1200 GVP 030, Subway USB, 32MB RAM
»06.11.12 - 14:46