-
-
Just looking around
Posts: 19 from 2021/1/31
Good question, did newer releases do anything good for support of the g4-cube-hardware 450/R128pro/original ADC-Monitr?
I am a retro-gamer, so main target of the cube is gaming and watching demos. Getting connected to my NAS would be fine, but is not a must have. Browsing the web is not needed. I do need an alternative Solution for the audio because the appe-pro-speakers do not work.
First test:
1. Regardless what version I use, the Monitor stays black and the LED blinks (unsupported mode)
2. Shift/F1/LMB does not work on Macs, because left Mouse-Button ejects the CD...so no boot menu at all.
3. After pressing "c" and then holding "ctrl" does work but I have to hold a longer time due boot up, otherwise the monitor goes black again and blinks.
4. If I do hold "ctrl" I see the desktop (Ambient-Screen)
----
5. Installing does not work because OS9-Harddisk-Driver and the installed OS9.0.4 makes the iWizzard go crazy.
5a. Does Morphos boot from external storage like FireWire-Harddisk?
5b. Is there an other way of staying with OS9 and installing Morphos too?
6. Getting to the Monitor-Sektion and choosing nothing leads directly to a black screen and a blinking LED on the Monitor
6a. 16Bit Colordepth and 640x480 seems to be OK
6b. 24Bit ColorDepth and 640x480 does lead to a black Screen and blinking LED again.
There is only 640x480 Resolutions visible in the menu.
Greetings
Doc
[ Edited by drzeissler 31.01.2021 - 17:46 ]
-
»31.01.21 - 16:37