Paladin of the Pegasos
Posts: 1213 from 2004/12/1
From: Paris, France
Quote:
Why not just use a standard IDE CD drive as the slave device on the ATA port? All you need is a gender changer for the 44-pin ATA port, and a suitable cable.
no way.
As it has been discussed here and on ppczone.org before, and as BPlan stated themselves, adding a slave device on the ATA port works very badly as the IDE controler can only tolerate a short wire between the device and the IDE port. This maximum length is already reached between the controler and the IDE plug where you connect your HD.
Efika users use USB CDrom drives when needed because it's the only working option.
[ Edited by SoundSquare on 2008/8/21 22:46 ]