Forum Index
 » 
User Forums
 » 
Hardware
Club 3D 9250 for Efika?
  • Just looking around
    MrZammler
    Posts: 18 from 2003/3/3
    I''ve got my hands on a Club 3D 9250 AGP card, but I'm not sure if it will work with the Efika.

    The card's connector has both the 3.3V and 1.5V keys, but the card is listed as 4X and 8X compatible only.

    Here's a link to the card:

    http://www.club3d.nl/index.php/products/graphics/item/209

    If someone could provide some insight on this? Wouldnt want to fry the little board...
  • »21.08.07 - 07:42
    Profile
  • Order of the Butterfly
    Order of the Butterfly
    Phantom
    Posts: 381 from 2004/9/7
    Try it Syntekne!!!... Don't worry.... Impossible is nothing ;-) ;-)
  • »21.08.07 - 10:22
    Profile
  • Just looking around
    MrZammler
    Posts: 18 from 2003/3/3
    I worry!!!

    I'm afraid that I'm gonna be left with a nice PPC powered doorstep...
  • »21.08.07 - 12:04
    Profile
  • Paladin of the Pegasos
    Paladin of the Pegasos
    SoundSquare
    Posts: 1213 from 2004/12/1
    From: Paris, France
    yes it should work, i got one too in my efika. Not a Club3D but who cares the brand...
  • »21.08.07 - 17:33
    Profile
  • Just looking around
    MrZammler
    Posts: 18 from 2003/3/3
    Yes, it did work... thanks guys.

    I was worried caused it was labeled as 4x/8x only, which it means 1.5V only... Works fine in 3.3V
  • »21.08.07 - 17:49
    Profile
  • Yokemate of Keyboards
    Yokemate of Keyboards
    magnetic
    Posts: 2129 from 2003/3/1
    From: Los Angeles
    Mr Zammier

    AGP speed means nothing. Is the voltage that matters for Efika, and this board is known working. Also be sure to visit ppczone.org for more Efika info

    magnetic
    Pegasos 2 Rev 2B3 w/ Freescale 7447 "G4" @ 1ghz / 1gb Nanya Ram
    Quad Boot: MorphOS 2.7 | Amiga OS4.1 U4 | Ubuntu PPC GNU/Linux | OS X 10.4
  • »21.08.07 - 21:53
    Profile Visit Website