Hi all,

Just got my old Peg 1 out and would like to use SCSI with it, I have a few Adaptec cards but will MorphOS see any of them? Do I need drivers? Any help guys?

ZXoney

It has been a long time ago, but as far as I can remember, nothing special was needed. I use it for my SCSI-scanner(Mustek 6000 SP) and had never a problem (I use FX-Scan).

Regards Tom

But... SCSI cards have their own BIOS. That's why, for example, on a PC, they are readily useful in the operating system.
Does this mean that we are benefiting again from SmartFirmware's x86 emulator?

mos has drivers only for symbios logic.
I've Symbios 810 and it's working pretty well (fxscan/hdd).

Yes here also Symbios logic scsi card on Peg2.
A 53c810 and is working perfect and fast! with my scanner a Umax Astra 2400S.
Very good scanner!But big..
Never tried a harddisk with it.
Using Fxscan,Scanquix5 and Betascan sometimes.
All work ok.


[ Edited by amiga4001 on 2007/6/13 20:13 ]

Hi,
working here too with my DVD/CDRW drives

Hi guys

Just so you know, we have Symbios 895 pci scsi cards for Pegasos IN STOCK NOW for $39.95 US. These are fully tested with Linux and MOS and are the FASTEST UWSCSI cards available for PEgasos/MOS (80mb/sec!!). I also have 1 symbios 810 card left (fast scsi not as fast) for $19.95...

STAY AWAY from Symbios 875 cards the driver is bugged unless you get lucky.

magnetic

Is the 895 still in stock?

[ Edited by DeQuevedo on 2007/6/15 22:23 ]

DeQuevedo


Sure. Pm me . Paypal accepted..

Thanks guys,

I have one Symbios SCSI card:

LSI LOGIC
Symbios SYM21002

But still does not work so I ordered a 895.


ZXoney