Is the manual for the Pegasos 1 available for download anywhere (I can only find the manual for the PegII on the Genesi site). I just bought a Peg1 off eBay and need to know the details for the headers on the board so I can hook up the power and reset buttons etc.
Also, does the PPC750 aka G3 chip run fanless or does it require a 40mm commonly used on GPUs and northbridges?

Thanks,
Edward

[ Edited by digitaldisaster on 2006/3/9 19:08 ]

Had a Peg1; the board layout is pretty much the same as the Peg2 (and the headers on the board are the same IIRC -> I got a Peg2 manual with my Peg1 and after hooking everything up things worked )

And yes, the G3 on the Peg1 runs fanless.

Thanks for the fast response. Time to pull out all of the spare bits I've got lying around and throw togerther a testbed machine untill I can afford to build a brand new one.
I know the G3s in the older iMacs ran fanless but the heatsink on the Peg1's CPU card had screwholes for a fan that look like theyve been used (paint stripped off) so I thought I had better check, don't want to kill it on the first use...

Thanks again,
Edward

AFAIK no fan is needed... mine has been working for days without fan, and didn't even lock up...

sounds good, no need to go buy a fanless mini-ITX Via Eden board then

@amiades

...but we're talking about the same Peg1 here

Sure! ;) It has been a very good buy... thanks a lot. Not a single flaw till now, and I hope neither in a long time...

@amiadades

Thank you too, and I will contact you as soon I'm in the vicinity of Asturias (as promised)

OT:

@digitaldisaster

Since you're a new member of the Pegasos/MorphOS community, I suggest you check out The Pegasos Book; it contains a lot (!) of usefull info:

http://wikipeg.free.fr/wikini/wakka.php?wiki=ThePegasosBook

I've been reading it but there is little reference to the hardware, particularly the Peg1.
I may help with the english translation, although I don't speak French my english skills are pretty good (pitty about my spelling ) and I can rewrite what is there at the moment to be a damn site more legible to a native english speaker than it is. That's not to say taht the work that has been done isn't fantastic but it needs improvment which is where I may be able to help once I've got the system up and running.
The main reason I bought the Peg is for development so just about the first thing I am going to do is get GCC from MDC installed on it!