Voodoo4 and Radeon!
  • Paladin of the Pegasos
    Paladin of the Pegasos
    ThePlayer
    Posts: 1069 from 2003/3/24
    From: Hamburg/Germany
    I have a Voodoo4 PCI in my Peg2 running well under MOS, but i have serios problems with the Voodoo in Linux, i have also a Radeon 7000 AGP., is it possible to run the Peg with both Cards at the same time? Voodoo for MOS and the AGP Radeon for Linux?
    PowerMac G5 Quad 2.5 running UWQHD Resolution
  • »30.12.04 - 11:21
    Profile
  • Paladin of the Pegasos
    Paladin of the Pegasos
    Acill
    Posts: 1926 from 2003/10/19
    From: Port Hueneme, Ca.
    From what I know that Radeon must be PCI and the Voodoo AGP to do that. Something in the OF looks for the ATI card in AGP and if found makes it enabled first.
    Powermac Dual 2.0 GHZ G5 PCI-X (Registration #1894)
    Powerbook 1.67GHZ
    Powermac Dual 2.0 GHZ G5 PCIE (Registration #6130)
    A4000T CSPPC, Mediator
    Need Repairs, upgrades or a recap in the USA? Visit my website at http://www.acill.com
  • »30.12.04 - 12:04
    Profile Visit Website
  • Paladin of the Pegasos
    Paladin of the Pegasos
    ThePlayer
    Posts: 1069 from 2003/3/24
    From: Hamburg/Germany
    Is someone using a Voodoo4 Card with Linux?

    [ Edited by ThePlayer on 2004/12/30 22:48 ]
    PowerMac G5 Quad 2.5 running UWQHD Resolution
  • »30.12.04 - 12:21
    Profile
  • Order of the Butterfly
    Order of the Butterfly
    Posts: 261 from 2003/3/13
    From: Rotterdam, the...
    I was using a voodoo4 AGP with linux.
    The problem is, you will not be able to
    use HW 3D accel under PPC linux.

    Gr,
    Felix.
  • »30.12.04 - 15:36
    Profile Visit Website
  • Priest of the Order of the Butterfly
    Priest of the Order of the Butterfly
    analogkid
    Posts: 672 from 2004/11/3
    From: near myself
    have you used the tdfx driver with X ? I've seen it on a Voodoo4 only with framebuffer driver, the other didn't work.
  • »30.12.04 - 16:17
    Profile
  • Paladin of the Pegasos
    Paladin of the Pegasos
    ThePlayer
    Posts: 1069 from 2003/3/24
    From: Hamburg/Germany
    I don't need the HW 3D accel.
    I have used the tdfx driver with X, how can i switch to the framebuffer driver?
    Here is my x86config http://www.pegasosforum.de/viewtopic.php?p=6623#6623
    and here a pic how my problem looke like: http://www.pegasosforum.de/download.php?id=52
    PowerMac G5 Quad 2.5 running UWQHD Resolution
  • »30.12.04 - 16:38
    Profile