Wacom Tablets
  • Butterfly
    Butterfly
    bigdan
    Posts: 63 from 2003/4/12
    From: France
    Any infos welcome concerning tablets support on Peg'I or Peg'2 under MorphOs 1.4.x (and software used with tablet like FxPaint2, etc..).

    Anybody test usb Wacom recents models like ?

    x Graphire 3 (normal (A6) and XL (A5) models)
    x Volito (A6)
    x Intuos2 (lots of models in usb or serial)

    Thanks in advance.

    bigdan
  • »26.01.04 - 14:03
    Profile Visit Website
  • Priest of the Order of the Butterfly
    Priest of the Order of the Butterfly
    Tcheko
    Posts: 536 from 2003/2/25
    From: France
    Hello bigdan,

    You will find more information at this place : http://www.e3b.de/usb/main_supported_e.html

    Morphos uses Poseidon stack.

    Regards,

    Tcheko
    Quelque soit le chemin que tu prendras dans la vie, sache que tu auras des ampoules aux pieds.
    -------
    I need to practice my Kung Fu.
  • »26.01.04 - 14:26
    Profile Visit Website
  • Order of the Butterfly
    Order of the Butterfly
    liquidbit
    Posts: 407 from 2003/10/12
    Hi,
    I wouldn't create a new post when bigdan already did..
    I couldn't find anything on the a Poseidon web-site over a Pen Tablet support list.
    What I did was the following, I borrowed two Wacom Tablets (here in Europe you don't have other choice) from a computerstore. The Volito(cheapest Wacom Tablet) & the Graphire3 (double the price).Both A6.
    Poseidon recognized both but the Volito was the one which was working, the Graphire3 did nothing on the screen...
    I tested them on DebianPPC aswell and they working both!
    The only problem on MOS is that it works like a mouse.For example if you pointing to the tablet edges, the pointing arrow remains in the middle, only when you wave with the pen on the tablet it starts moving.

    Do I need some extra drivers/classes for the PenTablets ?

    Please help me quick because I only have one week to test them both!

    Regards,

    Liquidbit
    ..there will be only one left.
  • »27.09.04 - 07:32
    Profile
  • Order of the Butterfly
    Order of the Butterfly
    liquidbit
    Posts: 407 from 2003/10/12
    Here some screenshots...

    Wacom Volito
    http://www.geocities.com/liquidbit/pegasos/wacom-volito-001.jpg

    http://www.geocities.com/liquidbit/pegasos/wacom-volito-002.jpg

    Wacom Graphire3
    http://www.geocities.com/liquidbit/pegasos/wacom-graphire3-001.jpg

    http://www.geocities.com/liquidbit/pegasos/wacom-graphire3-002.jpg

    ...an example of my test drawings with the Wacom PenTablet :-D
    http://www.geocities.com/liquidbit/pegasos/wacom-example.jpg

    [ Edited by liquidbit on 2004/9/27 11:35 ]
    ..there will be only one left.
  • »27.09.04 - 09:34
    Profile
  • Order of the Butterfly
    Order of the Butterfly
    realstar
    Posts: 298 from 2003/2/24
    From: Canada
    I am sucessfully using an e3works Stylo
    on MorphOS. Everything works including
    pressure and absolute movement.

    You can see the Stylo tablet here:
    http://www.e3works.com/stylo.html

    A simple review can be found here:
    http://www.extremereviews.net/data.php ?recordID=126&page=1&type=review

    To liquidbit:
    I tested graphire2 before and could not get
    any results. The other tablet appears to
    be trying to work as a hid device so check
    if it's on absolute mode in the poseidon
    settings as relative input could act like
    a mouse...
  • »27.09.04 - 13:41
    Profile Visit Website
  • Order of the Butterfly
    Order of the Butterfly
    liquidbit
    Posts: 407 from 2003/10/12
    thanks realstar,
    I will continue my investigation, like I said only Wacom you can find here in Europe. :-(
    ..there will be only one left.
  • »27.09.04 - 14:55
    Profile
  • Order of the Butterfly
    Order of the Butterfly
    liquidbit
    Posts: 407 from 2003/10/12
    After a deep investigation the conclusion is as follows:

    THEY DO NOT WORK ON MOS


    ..now i have to keep one tablet ...yeah for my mac :-(
    ..there will be only one left.
  • »28.09.04 - 14:58
    Profile