Just to rule out the adapter and the slot, I bought one of the same x1 -> x16 adapters that I've read BigFoot is using (the kind with the USB cable). It was only £4! This enabled me to test the card that I know works in the x16 slot in one of the x1 slots instead of the x4.
It made no difference, so this is definitely a card or driver issue.
Is there any way to get any support on this, or is it just down to this forum? Thanks.
Code:
Loaded "bootcyrusplus.img" from "HDIMG0:", booting...
45.944|
45.945|
45.946| ABox 1.30 (2.7.2018) © 1999-2022 by Ralph Schmidt, Emmanuel Lesueur, Teemu Suikki, Harry Sintonen
46.002| P50X0_InitIDE@0: Drive present
46.007| P50X0_InitIDE@1: Drive not present
46.011| Post-reset SATA delay hack
46.016| Post-reset SATA delay hack
46.019| P50x0 SATA Driver@0: PIO Mode 4
46.022| P50x0 SATA Driver@0: UDMA Mode 6
46.026| ide.device@0: ATA-HD CT2000MX500SSD1 <DIRECT_ACCESS>
46.032| HandleInterrupt@0: Signature is now 0x00000000
46.036| HandleInterrupt@0: Signature update
46.040| HandleInterrupt@0: Phy ready
48.034| usbscsi.device@0: Mount <HDIMG0>
48.037| usbscsi.device@0: Partition <HDIMG0> DosType 0x444f5307 BootPri 15
48.594| Radeon: Read BIOS ROM @0x1440919c
50.337| rec phys buffer 0x14df9e24 length set to 0x7d0
