Paladin of the Pegasos
Posts: 1210 from 2010/1/6
From: EU-Austria (Wien)
Using a DAWICONTROL DC-2975U with LSI53C875E (SCSI III /LVD) in my PEG2 for scanning with an old Artec 6000C Plus (SCSIII). Using ScanQuix 5.5, which works perfect.
Be sure to terminate your scanner.
42546907up.jpgOn PowerMAC G5 I've also a Symbios-Card - works also flawless with Artec 6000C
On the other hand I use also an Epson 1640SU, witch works fine under SCSI and USB useing SCANDAL.
As Newsense mentioned before: You have to install the updated Epson2.device in MosSys:Devs/Scanners. They are *not* part of MOS3.15-ISO. Can be found here:
https://drive.google.com/file/d/1dsENMd8aMunAofAapb2dpg1Fi84ZwNzt/view?usp=sharing
Do NOT install manualy in System:Devs/Scanners, where it was located in the past (you may delete all Scandal-related files there). Included installer does it right.
Otherwise there will no USB connetction!
Peg2, 3xPowerMac G5, 2xPowerbookG4, 2x MacMiniG4, Efika (again), A3000T and life is never boring.....