Paladin of the Pegasos
Posts: 1210 from 2010/1/6
From: EU-Austria (Wien)
Serial port gives you following info during starting quark-kernel:
ABox 1.30 (2.7.2018) © 1999-2018 by Ralph Schmidt, Emmanuel Lesueur, Teemu Suikk
i, Harry Sintonen
PPC5200 ATA/ATAPI Driver@0: PIO Mode 4
ide.device@0: ATA-HD TS8GCF133 <DIRECT_ACCESS>
ide.device@0: Mount <Boot>
ide.device@0: Partition <Boot> DosType 0x53465300
ide.device@0: Mount <Sys_OS>
ide.device@0: Partition <Sys_OS> DosType 0x53465300 BootPri 0
ide.device@0: Mount <Work>
ide.device@0: Partition <Work> DosType 0x53465300
ide.device@0: Mount <Temp_Data>
ide.device@0: Partition <Temp_Data> DosType 0x53465300
usbscsi.device@0: Mount <UMSD0>
usbscsi.device@0: Partition <UMSD0> DosType 0x4d534400
Radeon: Failed to allocate CCE AGP memory
usbscsi.device@0: Notify Partition <UMSD0>
myFreeClass : Mousemeter.sbar objectcount =1
At this point, MOS overtakes EFIKA hardware and serial port is'nt aktive any more. Even
rds boot-argument does'nt give more info, because MOS does'nt support EFIKA's serial port.
But you see in the 3rd-last line a hint, that MOS recognizes a Radeon-Card. In my case its a Radeon 9200, which starts properly, nevertheless the error-message.
Maybe thats a hint to find out, whether your Card is recognized by MOS, or not.
[ Editiert durch Amigaharry2 14.01.2021 - 09:31 ]Peg2, 3xPowerMac G5, 2xPowerbookG4, 2x MacMiniG4, Efika (again), A3000T and life is never boring.....