• Order of the Butterfly
    Order of the Butterfly
    Spectre660
    Posts: 217 from 2015/6/30
    Probably a U-Boot variable to specify the pcie16 ,pciex1 or pci slot to initialize would be required. The default is the pciex16 and it does not bother with the other slots even when there is no card in the pciex16 slot.

    The Sam460ex has a variable to select onboard graphics or pcie/pci.
    Never tried to boot with both a pciex16 and pci card installed at the same time though but it handles a single Radeon configuration as it was meant to.

    Quote:

    Andreas_Wolf wrote:
    > I am unsure if there are PCI slots compatible in other hardware with that kind of card.

    The PCI slots of the X5000/Cyrus are compatible, that's not the problem. The issue is probably with the board firmware or its configuration/settings.
  • »27.10.18 - 12:58
    Profile