Quote:Andreas_Wolf wrote:
> the soc if one on the topo have to be one only ...
> if you see the image you will see two with same id
You mean the "PCI 1957:0451" ID? If yes, are you sure this is the P5040 SoC?
yes if not the soc we will have a more big problem.
> L3 cache [...] is used only for corenet and not as sdram
> for be sdram have to be set up in source config of uboot ... but no one setup it. and build.
Then this should be changed in U-Boot. Who is the developer/maintainer of U-Boot for Cyrus/X5000?
Yes. Developer varisys, manteiner was before i quit Perez.
> 2 gbs max for 5020
> G5 Quad is 7/8 Gb/s
Yes, I already compared my PowerMac G5 to the X5000 (both with MorphOS) last year and basically came to the same conclusion:
AmigaMARK Memory, stream:
http://morph.zone/modules/newbb_plus/viewtopic.php?forum=11&topic_id=11137&start=593RAGEMEM:
http://morph.zone/modules/newbb_plus/viewtopic.php?forum=11&topic_id=11137&start=624> the topology of the cyrrus is totally strange compared all topology in the
> world Informaic Tecnology. qemu dont manage it because strange.
Okay, so the Cyrus board topology is strange, not wrong
Working bad... issue with some boards: example cmi sound card made machine freeze, slow performances pcie sata 3 controllers with fast ssd sata3 max 400mb/s r 100Mbs w . flashdrive max 900mb r .. 150 w.... and so and so.
this are my bechmark not with altivec : https://www.dropbox.com/s/wshgd98gfny33ma/bench.xlsx?dl=0
distributed G5 Quad on fedora ppc64 dnet bench
[Aug 23 16:52:41 UTC] Automatic processor type detection found
a PowerPC 970MP (G5) processor.
[Aug 23 16:52:41 UTC] OGR-NG: using core #1 (KOGE 3.1 Hybrid).
[Aug 23 16:53:00 UTC] OGR-NG: Benchmark for core #1 (KOGE 3.1 Hybrid)
0.00:00:16.29 [42,505,737 nodes/sec]
[Aug 23 16:53:00 UTC] RC5-72: using core #4 (KKS 7450).
[Aug 23 16:53:21 UTC] RC5-72: Benchmark for core #4 (KKS 7450)
0.00:00:17.47 [18,852,434 keys/sec]
[Aug 23 16:53:21 UTC] Compare and share your rates in the speeds database at
http://www.distributed.net/speed/
(benchmark rates are for a single processor core)
Quote:
You mean the "PCI 1957:0451" ID? If yes, are you sure this is the P5040 SoC?
yes if not the soc we will have a more big problem.
edit: e5500 not have some math instruction that are emulated by linux kernel. plus dont have the numa too.
[ Edited by tlosmx 11.09.2017 - 01:25 ]
