MorphZone

PB FireWire boot?

NicePics13

# 1
Butterfly

Posts: 63 from 2007/3/9

From: Finland

Recently bought an external HDD case with USB 2.0/FireWire 400/eSATA ports and updated the firmware to fix various FW bugs.
Probably going to use it for backups only but installed OS X on it just to test FW boot - it works but only on my PowerMac.. the PowerBook takes an awful long time to find no external drive connected on the boot screen!
(The FW 400 port is not broken as I did install OS X using the PB)

Q: is this a known PB software bug?
Q: could a FW 400 to FW 800 adapter make it boot?
Macally_G-S350SUA.jpg

CBM Amiga 1200 + 4MB AMITEK with 33MHz 68882 FPU
PowerBook5,4 1024MB 1333MHz G4
»10.08.14 - 13:39

DedyAmigo

# 2
Cocoon

Posts: 41 from 2003/7/19

From: Czech Republic

Hi, I was try this too, and have same problem. No advices still?
Dedy
http://amigo.bodli.net
Powerbook G4/1.67GHz, MOS 3.17 reg
Asus Zenbook UX32VD, Xubuntu 20.04
»24.02.15 - 10:29

Amigaharry2

# 3
Paladin of the Pegasos

Posts: 1280 from 2010/1/6

From: EU-Austria (Wien)

Useing FW or CD takes also on my Macs a (relative) long time to find and boot.....

I use USB instead of FW! You won't recognice the speed difference really.......
OpenFW-command: boot ud:,\\:tbxi
Peg2, 3xPowerMac G5, 2xPowerbookG4, 2x MacMiniG4, Efika (again), A3000T and life is never boring.....
»24.02.15 - 13:24

Zylesea

# 4
Yokemate of Keyboards

Posts: 2057 from 2003/6/4

Quote:

NicePics13 schrieb:
Recently bought an external HDD case with USB 2.0/FireWire 400/eSATA ports and updated the firmware to fix various FW bugs.
Probably going to use it for backups only but installed OS X on it just to test FW boot - it works but only on my PowerMac.. the PowerBook takes an awful long time to find no external drive connected on the boot screen!
(The FW 400 port is not broken as I did install OS X using the PB)

Q: is this a known PB software bug?
Q: could a FW 400 to FW 800 adapter make it boot?
Macally_G-S350SUA.jpg

I use a firewire external drive to boot OS X from w/o problems on my Powerbook 5.6. I haven't modified anything at firmware level nor did any other actions. It's a bog standard FW400 harddisk (by iomega) and a bog standard Powerbook and it works OOTB here.
--
http://via.bckrs.de

Whenever you're sad just remember the world is 4.543 billion years old and you somehow managed to exist at the same time as David Bowie.
...and Matthias , my friend - RIP
»24.02.15 - 21:13