Yokemate of Keyboards
Posts: 2059 from 2003/6/4
Quote:koszer schrieb:
Quote:
cip060 wrote:
I HATE the procedure with a USB stick via the original firmware on the command line
Well, there's always the
not-recommended way... The Dark One... Quicker, easier, more seductive... Could blow your machine up instaneously...
1. replace boot.img on your boot partition with the one from ISO (the correct one for your machine!)
2. reboot old MorphOS with new kernel
3. mount ISO and run update
Mind you - this might go wrong if older MorphOS version won't for some reason work well with newer kernel. You have been warned!
I used that simplified way for two of my four machines I updated and it worked flawlessly. That is really quick. And of course nasty
The other two computers were updated by booting the iso off the hdd following this routine: https://via.bckrs.de/MorphOS/morphos_update.html (German)
Only my Peg1 stays 1.4.5 (and stored stbthe attic…).
--
http://via.bckrs.de
Whenever you're sad just remember the world is 4.543 billion years old and you somehow managed to exist at the same time as David Bowie.
...and Matthias , my friend - RIP
