MorphZone

PEG 1 & Wifi..Which hardware pci card?

shakenfr

# 1
Just looking around

Posts: 10 from 2007/12/29

Is it possible to connect the PEG I using a wifi card ?
If yes which wifi card is supported ?
best
Bruno
»22.01.08 - 06:02

antibike

# 2
Acolyte of the Butterfly

Posts: 112 from 2003/3/5

From: Germany / Sachsen

http://aminet.net/driver/net/prism2.lha
download and look inside the manual.
but there is the problem that you only have WEP encryption.
»22.01.08 - 06:39

Acill

# 3
Paladin of the Pegasos

Posts: 1928 from 2003/10/19

From: Port Hueneme, Ca.

and its only B speed. Your best bet would be to just get a wireless ethernet bridge. You can then set it up through a browser and have real security and decent speeds.
Powermac Dual 2.0 GHZ G5 PCI-X (Registration #1894)
Powerbook 1.67GHZ
Powermac Dual 2.0 GHZ G5 PCIE (Registration #6130)
A4000T CSPPC, Mediator
Need Repairs, upgrades or a recap in the USA? Visit my website at http://www.acill.com
»22.01.08 - 06:46

shakenfr

# 4
Just looking around

Posts: 10 from 2007/12/29

Thanks a lot for your quick answers
best
bruno
»22.01.08 - 07:11

AyoS

# 5
Order of the Butterfly

Posts: 410 from 2003/8/13

From: West Palm Beac...

I am thinking of adding a wireless network to my home. I currently have a Dell Inspiron 600m that will work purfectly... As for the PegII I am taking acill's advice and looking into a Wireless Ethernet bridge. Does anyone here have any experience with any particular models/manufacturers? I have looked at a linksys WAP54g... which Newegg has listed for $69.99... I have also seen cheaper brands... can anyone give me some advice as what to stay away from... currently I don't even have a Wireless router yet... so I could use some advise on that as well?

Thanks in advance.
»19.07.08 - 04:32