MorphZone

X5000 / R7 240 not booting MorphOS 3.20 from USB

mdr

# 1
Just looking around

Posts: 4 from 2026/6/2

Hi all,

I was keen to give MorphOS 3.20 a go as it now appears to support the Radeon R7 240 card I have in my X5000/20. I have written the install image to a USB drive, and have done a "usb reset" followed by "bootmorphos" from the uboot CLI. This starts the bootloader, but just hangs at this stage - no further output is displayed, no matter how long I leave it.

Any ideas ? Thanks!

- Mark
»02.06.26 - 18:40

pampers

# 2

Paladin of the Pegasos

Posts: 1065 from 2009/2/26

Same happens for me on X5000/040 with Radeon X1950.
Booted 3.19 with no issues, installed on drive.
Then I was lucky to get only 1 boot of 3.20 via usb, installed and now every boot hangs at the same message in serial log:

Code:

MorphOS boot loader ve��io 1>17
Booting f�o{"!0
Tryig to load "bootcyrusplus>img" fro{"!0:"...
Trying to load "boot>img" fro{"!0:"..>
Loaded "boot>img" fro{"!0:", booting...
x>13x�
x.13x�
8.13y ABox 1.30 (2>7>201x) � 1y99-2022 by Ral� Schmidt, E�mauel Lesueu�, Teemu Suikki, Harry Sintoe��H�x>1y1 P5040IitIDE@0: Drive prese_H�8.1y5 P5040_I/�%1: D�ive ��e�et
x.284 P50x0 SATA D�iver@0: PIO Mode 4
x.2xx P50x0 SATA Driver@0: UDMA Mode 6

Full log from one successful installation and then reboot to not working disk installation:

Code:


C�HU-Boo� mole-be_-2023-01-09 (Ja 0y 2023 - 0xz21:29 +0000)

CPU0z  P5040, Ve�io�z 2>1, (0x82040021)
Co�ez  e5500, Verio�: 1.2, (0xx0240012)
Clock Cofigu�a�o�:
       CPU0z2200 MHz, CPU1:2200 MHz, CPU2z2200 MHz, CPU3z2200 MHz,
       CCBz800  MHz,
       DDR:800  MHz (1600 MT/>"�х����) (Ay�ch�o�ou�), LBCz400  MHz
       FMA^1z 600 MHz
       FMAN2z 600 MHz
       QMA^z  400 MHz
       PMEz   400 MHz
L1z    D-cache 32 KiB e/����5
                                    I-cache 32 KiB e/����5
                                                          Re�e▒��figuratio� Wo�d (RCW)z
       00000000z y0e00000 00000000 acacy800 00440000
       00000010: 4480xc00 ff2ya000 6x000000 61000000
       00000020z 00000000 00000000 00000000 0003000f
       00000030z a0000000 00000000 00000000 00000000
Boardz CYRUS
36-bi� Add�e�ig
I2Cz   �eady
DRAM:  I~i_+��饹g.>..uig SPD
DDRz failed �
             ���XSPD from addre�>j
                                  De�ec�ed UDIMM CT51264BD160B.C16F
There i� �
          �<��z� CS0 for co�oller 0>
No� eough bao
             i���ielec�) for CS0+CS1 o co�oller 0, iterleavig diabled!
No� all DIMM� are ide�ical> Memo�y co�rolle�i�e�leavig disabled.
2 OiB lef� u�map�ed
2 OiB (DDR3, 64-bi      ▒1=11, ECC off)
       DDR Chi�-Selec� I~_�U�٥�g Modez CS0+CS1

Local Bu>▒������� H�����e�
BR0     0xE0001001      OR0     0xFFF00010
BR1     0xE1001001      OR1     0xFFF00010
BR2     0x00000000      OR2     0x00000000
BR3     0x00000000      OR3     0x00000000
BR4     0x00000000      OR4     0x00000000
BR5     0x00000000      OR5     0x00000000
BR6     0x00000000      OR6     0x00000000
BR7     0x00000000      OR7     0x00000000
LBCR    0x40000000      LCRR    0xx0010004
L2z    512 KiB eabled
Coree� Pla��K�+▒����z 2 MiB eabled
SERDESz bao
           �"�ͅ(,��5
                   MMCz   FSLSDHCz 0
Loadig Envi�o�me2ɵ MMC>>> OK
Boa�d Reviio� 2210
MACz 00z04zA3z6Bz43z42
SP(/��ҍ#D(�C0zF7zFCz07
EEPROMz NXID v0
PCIe1z Roo� Com�lex, x4 oe/b���� @ 0xfe200000
  01z00.0     - 1002z244 - Di��lay co�����5
                                             01z00>1     - 1002z264 - Di>��X^▒��ɽ����5
                                                                                      PCIe1z Bu>��j��j
                                                                                                      PCIe2z Roo▒����U�, x4 oe2, reg> 0xfe201000
  03z00.0     - 111dzx0y2 - B�idge device
   04z01>0    - 111dzx092 - B�idge device
    05z00.0   - 12dxze111 - Bridge device
     06z05.0  - 1102z0002 - Mul�imedia device
     06z05>1  - 1102z002 - I~pu� device
   04z02>0    - 111dzx0y2 - Bridge device
   04z03>0    - 111dzx0y2 - B�idge device
   04z0x.0    - 111dzx0y2 - Bridge device
   04z10>0    - 111dzx0y2 - Bridge device
PCIe2z Bu>��j�
              5
               PCIe3z diabled
PCIe4z di�abled
Lookig fo� VOA
PINSz 0xfc000x0x
videobooz Boo�ig PCI video ca�d b�>�b2չc_���b"�٥�� 0
���� BIOS POST
End BIOS POST
Se�_� VESA Mode
Foud �e�uied VESA mode
Abou���ej��� 27y
Abou� �
       z�сmode
Ooj��� 4y431 (0xc11?)
OK
XSize = 1024 YSize = 6x Ba�e = 0xx0000000
mmio_bae = 0xx0000000
Inz    e�ial
O�z   erial
E��z   e�ial
IDz NXID v0
S^z 116400015
UIDz 4429431001y10050acx0a080a0x00000
Erra�az ����� % x�C!ե*� da�ez 2016/04/25 0yz3xz17
CRCz xx?dca1a
SCSIz  E��o�z SCSI Co����ɡ) no2�չd

^e�z   Ini�ializig Fma�H�H��j �eadz dev # 0, block # 5223, cou�� 128 .>>
Fma/Ҫ���+���g mic�ocode ve�io� 106.1.0

MMC �eadz dev # 0, block # 5223, cou�� 12x >.>
Fma2z U�loadig microcode ve��io 106.1.0
Tuig PHY @ 3
Tuig PHY @
FM1@DTSEC5, FM2@DTSEC5
U�%     0z   USB EHCI 1>00
����ig b}>�2�Ɂdevice�>>> USB Device() foud
USB1z   USB EHCI 1>00
����ig b�� 1 fo� device�>>> 3 USB Device() foud
SJQ0 (1>5 Ob�)
GE a� device
       SATA1 (3 Gb�)
Er�o�z SCSI Co�roller() no2�չd
Ru�ing Ma�� S�K��� Boo�
X5000~ u�b re��e�
                 rese�_� USB>>>
USB0z   SB EHCI 1>00
����i~g b�� 0 fo� device�>>. USB Device(�) foud
USB1z   USB EHCI 1>00
�can/˝
      ��`1 fo� device�>.. 3 USB Device(�) foud
       ����i~g u>,2�Ɂ>�K��V"�٥���.�     �1 S�K��V"�٥��() foud
�o�hOS boo� loade� ver�io 1>17
Select a boo��(>_ѥ���j
                      *  1. HDIMG0z (boo�ɥ�K��_ 15)
   2> DH0: (boo� ��iori_ 0)
���/��2ɽ� HDIMG0
Tryig to load "boo�cyru��lus>img" f�om "HDIMG0z".>>
Loaded "boo�cyrus�lus>img" from "HDIMG0z", boo_�.>.
������
33>1yy
33.1yy� ABox 1>30 (2>7.201x) � 1yy9-2022 by Ral�h Schmid�, Emmauel Le�ueur, Teemu Suikki, Ha��y Sin�o�e~
33.252� P5040_I~i_0z Drive pre�en�
�r���� P5040_Ini�IDE@1: Drive p�e�e�
73>344� P50x0 SATA Drive�@0z PIO Mode 4
�r����@P50x0 SATA Driver@0z UDMA Mode 6
33.356� P50x0 SATA Driver@1z PIO Mode 4
33>35y� P50x0 SATA D�ive�@1z UDMA Mode 6
73>365� HandleIn�erru��@0z Sigature is now 0xeb140101
33>369� HadleIn�e��u��0z Signa�ure upda�e
33.33� HandleInte��u�0z Phy ready
33.37 ide>device@0z HL-DT-ST DVDRAM OH24^SD5  <CDROM~
33.417� ide.device@1z ATA-HD TS256GSSD230S    <DIRECTACCESS~
33.516� HandleIn�e��up�@1: Siga��e i� ~ow 0x00000000
33>521 HandleInterru��@1z Sig~a�u�e upda�
33>525 HandleIn�erru��@1z Phy ready
33.x34� ide.device@1z  Mo��"!0~
33.837 ide>device@1z  Par�i_���"!0~ Do�Ty�e 0x53465300 Boo�Pri 0
33>943 ide.device@1z  Mo�� <DH1~
33>946� ide>device@1z  Par�i�io <DH1~ Do>U�����53465300
34>y34 usb�csi.device@0:  Mout <HDIMG0~
34.93x usb�csi.device@0z  Par�i�io <HDIMG0~ DosType 0x444f5307 Boo�Pri 15
75>41x Radeo: Do'� kow how �o ini�iali�e �he memo�y co����� �� �i� Radeo�H�S��I�� Radeo: Memory ize adju>_������j       5
                                                                                                                         C�HU-Boot molse-beta-2023-01-09 (Ja��2��j��Ғ�L'��%���Jj

CPU0:  P5040, Ve��ioO���bB���2040021)
Core:  e5500, VersioO�r�bB���0240012)
Clock Cofigu�atio:
       CPU0z2200 MHz, CPU1z2200 MHz, CPU2z2200 MHz, CPU3z2200 MHz,
       CCBzx00  MHz,
       DDRzx00  MHz (1600 MT/>"�х �ate) (Asynchro�u�), LBCz400  MHz
       FMA^1z 600 MHz
       FMA^2: 600 MHz
       QMANz  400 MHz
       PMEz   400 MHz
L1z    D-cache 32 KiB e~abled
       I-cache 32 KiB eabled
Re�et Cofigu�atio Wo�d (RCW):
       00000000z y0e00000 00000000 acacyx00 00440000
       00000010z 44x0xc00 ff29a000 68000000 61000000
       00000020: 00000000 00000000 00000000 0003000f
       00000030: a0000000 00000000 00000000 00000000
Boa�d: CYRUS
36-bit Add�e�sing
I2C:   �eady
DRAMz  Iitializi~g>>.>uing SPD
,Iz failed to read SPD f�o{
                           ��ɕ�� 81
Detec�ed UDIMM CT51264BD160B.C16F
There i>�� �ak o CS0 fo� co����Ɂ0>
Not e�ugh bao
             i���-elect) for CS0+CS1 o� co��oller 0, i�e�leavi~g disabled!
^ot all DIMMs are ide�ical> Memo�y co����� �*�߱U�٥�� diabled>
&z�      left uma��ed
2 OiB (DDR3, 64-bit, CL=11, ECC off)
       DDR Chi�-Select I_ɱ�YXW�� Mode: CS0+CS1

Local Bu� Cot�oller Regi�te��
BR0     0xE0001001      OR0     0xFFF00010
BR1     0xE1001001      OR1     0xFFF00010
BR2     0x00000000      OR2     0x00000000
BR3     0x00000000      OR3     0x00000000
BR4     0x00000000      OR4     0x00000000
BR5     0x00000000      OR5     0x00000000
BR6     0x00000000      OR6     0x00000000
BR7     0x00000000      OR7     0x00000000
LBCR    0x40000000      LCRR    0xx0010004
L2:    512 KiB e/����5
                      Co�eet Platform Cache: 2 MiB e/����5
                                                          SERDES: ba~k 2 disabled
MMCz   FSL_SDHC: 0
>>. OKg Eviro�e� f�o{j5
Board Revi�io 2210
MACz 00:04:A3:6Bz43z42
z 00:1EzC0:F7:FC:07
EEPROM: NXID v0
PCIe1z Root Com�lex, x4 oe1, regs @ 0xfe200000
  01:00.0     - 1002:7244 - Di��lay co�ller
  01:00.1     - 1002z?264 - Di��lay cotroller
PCIe1: Bu�00 - 01
PCIe2: Root Com�lex, x4 oeOb���� @ 0xfe201000
  03:00>0     - 111d:x092 - B�idge device
   04:01>0    - 111d:x0y2 - Bridge device
    05:00.0   - 12dxze111 - B�idge device
     06:05.0  - 1102:0002 - Multimedia device
     06:05.1  - 1102z?002 - I�ut device
   04:02.0    - 111d:x0y2 - Bridge device
   04z03.0    - 111d:x0y2 - Bridge device
   04:0x>0    - 111d:80y2 - Bridge device
   04:10>0    - 111d:x0y2 - Bridge device
PCIe2: Bu� 02 - 0a
PCIe3: diabled
PCIe4z di�abled
Lookig for VGA
PI^Sz 0xfc00080x
ideoboo�z Booting PCI video ca�d bu� 1, fuctio 0, device 0
Begi%=M POST
Ed BIOS POST
Setti~g VESA Mode
Foud re�ui�ed VESA mode
About to et mode 279
About to oet mode
Got mode 4y431 (0xc117)
OK
XSize = 1024 YSize = 6x Ba�e = 0xx0000000
{[Z��͕)���x0000000
IO�erial
O�tz   erial
Err:   erial
ID: NXID v0
S^z 116400015
UIDz 4429431001910050acx0a0x0a0x00000
!ձ� date: 2016/04/25 09z38z17
CRCz xx7dca1a
SCSIz  E��o�z SCSI Co�����(1Kr2�չd

^etz   Iitializing F�a

MMC read: dev # 0, block # 5223, cou���.ɩ
                                         Fman1z Uploading mic�ocode ver�io 106>1>0
è�j read: dev # 0, block # 5223, cout 128 >.>
Fman2z Uploadig microcode ver�io 106>1.0
Tu�ig PHY @ 3
Tuig PHY @
FM1@DTSEC5, FM2@DTSEC5
USB0z   USB EHCI 1.00
scaing bu>�2�� ��٥���.� �4 USB Device() foud
USB1:   USB EHCI 1.00
���ing bu� 1 fo� device�>>> 2 USB Device() foud
UQ0 (1>5 Gbp�)
CE at device
       SATA1 (3 Ob��)
Q>�K:SCSI Cotroller(�) �� foud
MorphOS boot loader ve��io 1>17
Booting f�o{"!0
Tryig to load "bootcyrusplus>img" fro{"!0:"...
Trying to load "boot>img" fro{"!0:"..>
Loaded "boot>img" fro{"!0:", booting...
x>13x�
x.13x�
8.13y ABox 1.30 (2>7>201x) � 1y99-2022 by Ral� Schmidt, E�mauel Lesueu�, Teemu Suikki, Harry Sintoe��H�x>1y1 P5040IitIDE@0: Drive prese_H�8.1y5 P5040_I/�%1: D�ive ��e�et
x.284 P50x0 SATA D�iver@0: PIO Mode 4
x.2xx P50x0 SATA Driver@0: UDMA Mode 6

MorphOS 3.x

»03.06.26 - 15:15

mdr

# 3
Just looking around

Posts: 4 from 2026/6/2

Hmmm. Have you found any workaround ? I tried setting the morphosargs envvar to "bm" to try and get the bootmenu, but that doesn't do anything either.
»04.06.26 - 17:17

pampers

# 4
Paladin of the Pegasos

Posts: 1065 from 2009/2/26

Quote:

mdr wrote:
Hmmm. Have you found any workaround ? I tried setting the morphosargs envvar to "bm" to try and get the bootmenu, but that doesn't do anything either.

Nope, will try to swap some hw tomorrow but honestly if it doesn't boot from USB then I doubt any other hw like gfx or hard drive will make any difference.
MorphOS 3.x
»04.06.26 - 17:54

Brumiga

# 5
Order of the Butterfly

Posts: 274 from 2004/4/3

From: France

@mdr & pampers,

I have also an AmigaOne X5000 but 20. I have a Radeon hd5450 since a few years. When I bought it there was a Radeon r7 240. But when I tried to boot on MorphOs cd install that was no luck. Once I spoke about that problem to my vendor, Amedia, adn he told me to by a second hand Radeon hd 5450. For the moment I cannot play with games that open on their own screen 16 bits mosts because my graphic card does not support vesa modes. Or maybe it could but I am not able to set them. I will try to see if now it is better in this case or not for me.

Brumiga
»04.06.26 - 18:49

jacadcaps

# 6
MorphOS Developer

Posts: 3286 from 2003/3/5

From: Canada

@pampers

Getting a log with EDEBUGFLAGS=init in your boot params could provide us with some additional information.
»04.06.26 - 22:38

pampers

# 7

Paladin of the Pegasos

Posts: 1065 from 2009/2/26

@jacadcaps

Just "bootmorphos EDEBUGFLAGS=init"?

Tried twice, once the system started for my surprise.
Second time didn't.

EDIT: Tried with radeon 6950HD, it seems that on cold boot machine starts ok (doesn't matter what card) but after reset is dead again on the same messages.

EDIT2: It's kinda of reproduceable with cold boot and then restart. Checked with 3 different gfx cards. It "feels" like something is missing in initialisation after reset or smth and then it dies.

Code:


U-Boo� mole~-be_-2023-01-0y (Ja~ 0y 2023 - 0xz21z2y +0000)

CPU0z  P5040, Ve�io~z 2>1, (0xx2040021)
Coez  e5500, Verio~z 1>2, (0xx0240012)
Clock Co~fio��a_��K5
                           CPU0z2200 MHz, CPU1z2200 MHz, CPU2z2200 MHz, CPU3z2200 MHz,
       CCBzx00  MHz,
       DDRzx00  MHz (1600 MT/>"�х��<_V  B
                                         �y~ch�o~ou), LBCz400  MHz
       FMA^1z 600 MHz
       FMA^2z 600 MHz
       QMA^z  400 MHz
       PMEz   400 MHz
L1z    D-cache 32 KiB e~abled
       I-cache 32 KiB e~abled
Ree� Confio}a_��
                _o>BRC_)z
       00000000z 90e00000 00000000 acac9x00 00440000
       00000010z 44x0xc00 ff29a000 68000000 61000000
       00000020z 00000000 00000000 00000000 0003000f
       00000030z a0000000 00000000 00000000 00000000
Boa�dz CYRUS
36-bi
     ��ɕ��ing
I2Cz   �eady
DRAMz  I~i_+������>>>>}i~g SPD
DDRz failed �
             ��*� SPD f�om add�e�>�j
                                    De�ec_UDIMM CT51264BD160B>C16F
Thee i>�� �a~k o~ CS0 fo>▒���r���Ɂ0>
No*��՝

      ���(chi�-elec_    2�ɁCS0+CS1 o~ co~�olle� 0, i~�e�leaving diabled!
�� all DIMM>
            �� iden_k��> Memo�y co~����Ɂi~_ɱU�٥�� diabled>
 OiB lef� �ma��ed
2 OiB (DDR3, 64-bi      ▒1=11, ECC off)
       DDR Chi�-SelecJ��Y>��٥�� Modez CS0+CS1

Local B�>▒��Ѿ���ɁRegi>_ɯHHI0    0xE0001001      OR0     0xFFF00010
BR1     0xE1001001      OR1     0xFFF00010
BR2     0x00000000      OR2     0x00000000
BR3     0x00000000      OR3     0x00000000
BR4     0x00000000      OR4     0x00000000
BR5     0x00000000      OR5     0x00000000
BR6     0x00000000      OR6     0x00000000
BR?     0x00000000      OR?     0x00000000
LBCR    0x40000000      LCRR    0xx0010004
L2z    512 KiB e~abled
Co�e~e� Pla�fo�m Cachez 2 MiB e~abled
SERDESz ba~k 2 diabled
MMCz   FSLSDHCz 0
>.. -5g E~vi�onme~2ɽ�[j5
      Boa�d Reviio~ 2210
SP(/���p4zA3z6Bz43z42
MACz 00z1EzC0zF7zFCz0?
EEPROMz ^XID v0
PCIe1z Roo▒����U�, x4 oen1, �eo> 0xfe200000
  01z00>0     - 1002z?244 - Di>��X^▒��Ѿ����5
                                              01z00>1     - 1002z?264 - Di>lay co~�olle�
PCIe1z B}>��j��j
                PCIe2z Roo▒�����Y, x4 oe~2, �eo> 0xfe201000
  03z00>0     - 111dzx0y2 - B�idoe device
   04z01>0    - 111dzx0y2 - B�idge device
    05z00>0   - 12dxze111 - Bridoe device
     06z05>0  - 1102z0002 - M�l_����� device
     06z05>1  - 1102z?002 - I~�u"�٥��5
                                       ���02>0    - 111dzx0y2 - B�idoe device
   04z03.0    - 111dzx0y2 - Bidge device
   04z0x>0    - 111dzx0y2 - Bridoe device
   04z10.0    - 111dzx0y2 - B�idoe device
PCIe2z B}>��j�
              5
               PCIe3z diabled
PCIe4z diabled
Looki~g fo� VOA
PI^Sz 0xfc000x0x
videobooz Boo_��� PCI video ca�d b}>�b2�c_��
                                            �b"�٥�� 0
Beoi~ BIOS POST
E~d BIOS POST
Se_˝
    VESA Mode
Fo�d �e�ui�ed VESA mode
Abo��o ej��� 2?y
P��� �
      z��@mode
Ooj��� 4y431 (0xc11?)
OK
XSize = 1024 YSize = ?6x Bae = 0xx0000000
mmiobae = 0xx0000000
I~z    e�ial
O��z   e�ial
E��z   eial
IDz ^XID v0
SNz 116400015
UIDz 442y431001y10050acx0a0x0a0x00000
E��a�az �����%  x�
B}Z� da_�����z��z�����3xz1?
CRCz xxdca1a
SCSIz  E��o�z SCSI Co~����ɡ) no2�չ�

^ez   I~i�ializing Fma~

MMC �eadz dev # 0, block # 5223, co�� 12x >>>
Fma~1z U�loading mic�k��� ve�ion 106>1>0

MMC eadz dev # 0, block # 57223, co�������
                                          Fma~2z U�loadi~o mic�ocode ve�io~ 106>1>0
U��i~g PHY @ 3
Tui~o PHY @ ?
FM1@DTSEC5, FM2@DTSEC5
USB0z   USB EHCI 1>00
������� bu>�2��device>>> 4 USB Device() foud
USB1z   SB EHCI 1.00
������� bu>�2��device>>> 3 USB Device() fo�d
SATA0 (1.5 Ob�)
� a"�٥��5
SATA1 (3 Ob�)
E>�K'SCSI Con�olle�() ~o� foud
X5000~ boo��rho>�EDEBUG�L�W=i~�
o>h�M boob����Ɂve�io~ 1.17
Boo�ing f�om DH0
T�yi~g �o load "boocy�u>��>img" f�om "DH0z">.>
ߥ�� �o load "boo�>img" f�om "DH0z".>>
Loaded "boo�J��" f�om "DH0z", boo_˝���j
                                       41>810
41>x11
41>x12 ABox 1.30 (2>>2018) � 1999-2022 by Ralph Schmid  *�����Y
                                                               b��Օ��,Teemu Suikki, Ha��y Si~�oe~
1.x64 P5040I~i�IDE@0z D�ive �een�
41>x69 P5040Ii_1z D�ive �ee~�
41>y50 P50x0 SATA Dive�@0z PIO Mode 4
4#rʪ� P50x0 SATA D�iver@0z UDMA Mode 6
41>y61 P50x0 SATA D�ive�@1z PIO Mode 4
41>y64 P50x0 SATA D�ive�1z UDMA Mode 6
Srʺ     � Ha~dleIn�e��u0z Sig~a�ure i>r�� 0xeb140101
41>975 Ha~dleI~_������ Sig~a_ɕ)���*ѕ�C!S�ʺ�^ Ha~dleI_����� Phy �eady
41>yx2 ide>device@0z HL-DT-ST DVDRAM OH24^SD5  <CDROM~
42>023 ide>device@1z ATA-HD TS256OSSD230S    <DIRECTACCESS~
�>12y HandleI~_ɮ��1z Sig~a_�YJ� now 0x00000000
42>133 HandleI~�er�u��@1z Sig~a�u�e u�da�e
42>13 Ha~dleI~_�����L/Phy �eady
�r���� ide.device@1z  Mou� <DH0~
42>36 ide>device@1z  Pa�_ѥ���"!0~ Do>U�����53465300 Boo�P�i 0
4Cr���� ide.device@1z  Mou� <DH1~
42>444 ide.device@1z  Pa�_�Z��"!1~ Do>U�����53465300
43.532 u>���i>device@0z  Mo��B%50~
43>536 �>���i.device@0z  Pa�_�io~ <HDIMG0~ Do>U�� 0x444f5307 Boo%Z��j
                                                                     4y>4w4 Radeo~z Do~'� k~ow how �
                                                                                                    J���+���e � memo�y co~�rolle� of +k Radeo~
4y>4x3 Radeo~z Memo�y ize adju��ed �
                                    ���j        5
                                                 182.31� LIBChangeVPBitMapz v��ode i>�U115
1x3>44 LIBChangeVPBitMa�z v�ode i>�U115
1x4>514 LIBCha~geVPBitMa�z v�ode i>�U115
C�HU-Boot molsen-beta-2023-01-09 (Ja��2023 - 0x:21z2y +0000)

CPU0:  P5040, Ve�ion: 2.1, (0xx2040021)
Co�e:  e5500, Ve�io~: 1>2, (0xx0240012)
Clock CofiguratioOj
                          CPU0:2200 MHz, CPU1z2200 MHz, CPU2z2200 MHz, CPU3:2200 MHz,
       CCBzx00  MHz,
       DDR:x00  MHz (1600 MT/>"�х���(_V B
                                         ��.k�ɽ����), LBC:400  MHz
       FMA^1: 600 MHz
       FMA^2z 600 MHz
       QMA^z  400 MHz
       PMEz   400 MHz
L1z    D-cache 32 KiB e~abled
       I-cache 32 KiB eabled
Re�et Cofiguratio~ Wo�d (RCW):
       00000000: 90e00000 00000000 acacyx00 00440000
       00000010z 44x0xc00 ff2ya000 6x000000 61000000
       00000020z 00000000 00000000 00000000 0003000f
       00000030: a0000000 00000000 00000000 00000000
Boa�dz CYRUS
36-bit Add�e�ig
I2C:   �eady
DRAM:  Iitializig>>>>uig SPD
I: failed to �ead SPD f�om add�e�>j
                                   DYW�ѕ� UDIMM CT51264BD160B>C16F
The�e i>�o �ank o~ CS0 for cont�olle� 0>
^ot eough bak(chi-elect) fo� CS0+CS1 on co~t�olle� 0, ite�leaving diabled!
^ot all DIMM>
             � idetical> Memo�y co�t�olle� iterleavig diabled>
2 GiB left uma�ed
2 GiB (DDR3, 64-bit, CL=11, ECC off)
       DDR Chi�-Select Ite�leavig Mode: CS0+CS1
C!�k�� Bu>▒������� H����_��
                           R0   0xE0001001      OR0     0xFFF00010
BR1     0xE1001001      OR1     0xFFF00010
BR2     0x00000000      OR2     0x00000000
BR3     0x00000000      OR3     0x00000000
BR4     0x00000000      OR4     0x00000000
BR5     0x00000000      OR5     0x00000000
BR6     0x00000000      OR6     0x00000000
BR7     0x00000000      OR7     0x00000000
LBCR    0x40000000      LCRR    0xx0010004
L2z    512 KiB e/����5
                      Co�eet Pla��K�+▒����: 2 MiB eabled
SERDES: bak 2 diabled
MMC:   FSLSDHC: 0
Loadig Evi�omet f�om MMC>.> OK
Board Revi�io����j
                  MAC: 00z04:A3z6B:43:42
SP('��Ҋ�Q�(�27zFC:07
EEPROMz ^XID v0
PCIe1: Root Com�lex, x4 ge1, �eg> 0xfe200000
  01z00.0     - 1002z244 - Di>��X^▒���ɽ����5
                                              01z00.1     - 1002z264 - Di>��X^▒���ɽ���5
                                                                                       PCIe1z Bu� 00 - 01
PCIe2z Root Com�lex, x4 geOb���� @ 0xfe201000
  03:00>0     - 111d:x092 - B�idge device
   04:01.0    - 111dzx0y2 - Bridge device
    05:00>0   - 12d8:e111 - Bridge device
     06:05>0  - 1102z0002 - Multimedia device
     06:05>1  - 1102z002 - I�� device
 ��҂���j���"��ʒjɥ��"�٥��5
                            04:03.0    - 111dzx0y2 - Bridge device
   04:08>0    - 111dzx0y2 - Bridge device
   04:10>0    - 111dzx0y2 - B�idge device
PCIe2z B}>��j�
              5
               PCIe3: diabled
PCIe4: diabled
Lookig for VGA
PINSz 0xfc000x0x
v'bdeobootz Bootig PCI video card bu>�b2չction 0, device 0
Begi BIOS POST
Ed BIOS POST
Se�tig VESA Mode
Fou�d �e�ui�ed VESA mode
Abo�t to e� mode 27y
About to ge� mode
Got mode 49431 (0xc117)
OK
XSize = 1024 YSize = 76x Bae = 0x80000000
mmio_ba�e = 0xx0000000
RK�e�ial
Outz   erial
E��z   e�ial
ID: ^XID v0
S^z 116400015
UID: 4429431001910050acx0a0x0a0800000
Er�ataz ����� % x�C!ե�� da�e: 2016/04/25 0y:3x:17
CRC: xxdca1a
SCSI:  E��o>'SCSI Cotrolle�() ot fou�d

Nez   I/ѥ���饹g Fma�H�H��j �ead: dev # 0, block # 57223, cout 12x >>>
T+�1: U�loadig microcode ve�io 106>1>0

MMC read: dev # 0, block # 57223, cout 128 ...
Fman2: U�loadig mic�ocode ve�io~ 106>1>0
Tu�ig PHY @ 3
Tu�ig PHY @ 7
FM1@DTSEC5, FM2@DTSEC5
USB0z   USB EHCI 1>00
����ig bu>�2�� ��٥���>> 4 USB Device() foud
USB1z   USB EHCI 1>00
����ig bu� 1 for device�>.> 2USB Device() foud
SATA0 (1.5 Gbp)
E a� device
       SATA1 (3 Gb�)
Q.�K SCSI Cot�olle�() ot foud
SK��=4��� loader ver�ion 1.1?
��ѥ�g from DH0
T�yig to load "bootcyu>��]>J��" f�om "DH0z">>>
%��Zg to load "boot>img" from "DH0:"...
�+��� "boot>img" f�om "DH0z", bootig>>>
1rD�
18>4x3
1x>484� ABox 1.30 (2.>201x) � 1999-2022 by Ralh Schmidt, Emma�el Le�ueu�, Teemu Suikki, Ha��y Sitone
18>536 P5040I/�%0z Drive �re�et
18.541� P5040IitIDE@1z D�ive ��e�et
1x>628 P50x0 SATA D�ive�@0z PIO Mode 4
1x.632� P50x0 SATA D�ive�@0z UDMA Mode 6
C�HU-Boot mol�e-beta-2023-01-09 (Ja 0y 2023 - 0x:21z29 +0000)

CPU0z  P5040, Verion: 2.1, (0xx2040021)
Co�e:  e5500, Ve�ion: 1>2, (0x80240012)
Clock Cofigu�tion:
       CPU0z2200 MHz, CPU1z2200 MHz, CPU2z2200 MHz, CPU3:2200 MHz,
       CCB:x00  MHz,
       DDR:800  MHz (1600 MT/>"�х �a�e) (A�ych�o�ou�), LBC:400  MHz
       FMAN1z 600 MHz
       FMA^2z 600 MHz
       QMA^z  400 MHz
       PMEz   400 MHz
L1z    D-cache 32 KiB eabled
       I-cache 32 KiB eabled
Re�et Co�figura�ion Wo�d (RCW):
       00000000z y0e00000 00000000 acac9x00 00440000
       00000010: 4480xc00 ff2ya000 68000000 61000000
       00000020: 00000000 00000000 00000000 0003000f
       00000030z a0000000 00000000 00000000 00000000
Boa�d: CYRUS
36-bit Add�e�i~g
I2Cz   ready
DRAM:  Iitializing....u�g SPD
I: failed to �ead SPD from add�e�>�j
                                    De�ected UDIMM CT51264BD160B>C16F
The�e i>�o �ank o~ CS0 fo� cont�olle� 0.
^ot eough bank(chi�-elect) fo� CS0+CS1 o~ co�t�olle� 0, ite�leavi~g diabled!
^ot all DIMM� are identical> Memory co�trolle� ite�leaving di�abled>
&z�      left uma�ed
2 OiB (DDR3, 64-bi�, CL=11, ECC off)
       DDR Chi�-Select Ite�leaving Modez CS0+CS1

Local B�>▒��t����� H����_��5
                            BR0 0xE0001001      OR0     0xFFF00010
BR1     0xE1001001      OR1     0xFFF00010
BR2     0x00000000      OR2     0x00000000
BR3     0x00000000      OR3     0x00000000
BR4     0x00000000      OR4     0x00000000
BR5     0x00000000      OR5     0x00000000
BR6     0x00000000      OR6     0x00000000
BR7     0x00000000      OR7     0x00000000
LBCR    0x40000000      LCRR    0xx0010004
L2z    512 KiB e/����5
                      Coreet Platfo�m Cache: 2 MiB eabled
SERDES: bak 2 di�abled
MMC:   FSLSDHC: 0
Loadig Evi�o�met from MMC>.> OK
Boa�d Revi�ion 2210
MACz 00z04:A3z6B:43:42
SP('��Ҋ�Q�(�37:FC:07
EEPROM: �% v0
PCIe1z Root Com�lex, x4 oe1, reg� @ 0xfe200000
  01z00>0     - 1002z244 - Di>��X^▒��t�lle�
  01z00>1     - 1002z264 - Di>��X^▒��t�olle�
PCIe1z B��00 - 01
PCIe2z Root Complex, x4 oen2, reg� @ 0xfe201000
  03:00.0     - 111d:x092 - Bridge device
   04:01>0    - 111d:x0y2 - B�idge device
    05z00>0   - 12dx:e111 - B�idge device
     06:05>0  - 1102z0002 - Multimedia device
     06z05.1  - 1102z002 - I�t device
   04:02.0    - 111d:x0y2 - B�idge device
   04:03>0    - 111d:x0y2 - Bidoe device
   04:0x>0    - 111d:x092 - B�idge device
   04z10.0    - 111d:x0y2 - B�idge device
PCIe2: Bu� 02 - 0a
PCIe3z di�abled
PCIe4: diabled
Looki~g fo� VGA
PINSz 0xfc000x0x
videobootz Bootig PCI video card bu� 1, fuctio~ 0, device 0
Begi BIOS POST
Ed BIOS POST
Setting VESA Mode
Fou�d re�uired VESA mode
About to et mode 27y
P��� to oet mode
Got mode 49431 (0xc117)
OK
XSize = 1024 YSize = 76x Bae = 0xx0000000
mmio_bae = 0xx0000000
I:    e�ial
Out:   erial
E��z   e�ial
ID: NXID v0
SNz 116400015
UID: 442y431001y10050acx0a0x0a0800000
E��ataz ����%   x�C!ե*� date: 2016/04/25 0y:3x:17
CRC: xxwdca1a
SCSIz  E��o�z SCSI Co�trolle�(s) ot foud

^etz   Iitializing Fman

MMC �ead: dev # 0, block # 57223, cout 12x >.>
man1z U�loading microcode ve�io~ 106>1.0

MMC �ead: dev # 0, block # 57223, co�t 12x >>>
Fman2z Uploadig mic�ocode ver�io~ 106>1>0
T��ig PHY @ 3
Tu�ig PHY @
FM1@DTSEC5, FM2@DTSEC5
USB0z   USB EHCI 1>00
����ig bu� 0 for device�>>> 4 USB Device() foud
USB1:   SB EHCI 1.00
scan�ing bu>�2�� ��٥��͹>> 2USB Device(s) foud
UQ0 (1.5 Ob�)
CE at device
       SATA1 (3 Ob�)
E��o�z SCSI Co�t�oller() �� foud
X5000~ boo�mo�ho� ED���LAGS=iit
SK��=4��� loade� ve��ion 1.17
��ѥ�� f�om DH0
T�ying to load "bootcyru�lu�>img" f�om "DH0z"...
T�ying to load "boot>img" f�om "DH0z">..
Loaded "boot>img" from "DH0:", booti~g>>>
23.6y2
23>6y3�
23>6y4 ABox 1>30 (2.w.201x) � 1yy9-2022 by Ral�h Schmidt, Emmauel Le�ueu�, Teemu Suikki, Har�y Si~to~e
23.w45 P5040IitIDE@0: Drive p�eet
�&�50� P5040IitIDE@1: D�ive eset
23>x3x P50x0 SATA Drive�@0z PIO Mode 4
23>x42 P50x0 SATA Drive�0: UDMA Mode 6

[ Edited by pampers 05.06.2026 - 13:04 ]

MorphOS 3.x

»05.06.26 - 12:00

mdr

# 8
Just looking around

Posts: 4 from 2026/6/2

For what it's worth, neither cold or warm boots result in any progress for me. I'll try and hook up a serial cable and old laptop and capture some output if I can.
»05.06.26 - 17:42

jacadcaps

# 9
MorphOS Developer

Posts: 3286 from 2003/3/5

From: Canada

@pampers

No idea how flags are set on the x5000 - never had one. This log does not look like they are set right though.
»05.06.26 - 20:49

mdr

# 10
Just looking around

Posts: 4 from 2026/6/2

This looks like it has what you need to set boot args on an X5000 with uboot:

MorphOS Boot Arguments on U-boot Systems

I tried this with "setenv morphosargs bm" to see if I could get the boot menu, but nothing happened. Might work for other parameters or on your system though...
»06.06.26 - 09:11